wall to glass fixing non-hold 90 degree hydraulic hinge
wall to glass fixing non-hold 90 degree hydraulic hinge
US $72.5
10 piece

Item specifics

Glass thickness
Surface Finish
Satin/Mirror Polished
Door Weight



Product Name wall to glass fixing non-hold 90 degree hydraulic hinge
Item Number EK202.04
Features Door is self-closed at any position
Hold-open non-hold
Material Stainless Steel 304
Surface Satin Finish/Mirror Finish
Suitable Area Tempered glass
Glass Thickness 10-15mm glass panel
Door Weight ≤65kg
Door Width ≤1000mm
Door Hight ≤2400mm
Tested According to EN1154(100.000 cycles)
Sizes Details112×85×60mm
Weight N.W:1.1KG,G.W:1.2KG
Remarks with damping function


1.Glass to glass fixing 90˚

2.Suitable for 10-15mm tempered glass use

3.Maximum door leaf weight: 65kg

4.Maximum door leaf width: 1000mm

5.Self-closing at any door open angle

6.Double action maximum door open angle: 95˚

7.Non-hold configuration

8.Valve adjustment available for closing speed control

9.Self-positioned when door reaches to initial position

10.Tested according to EN1154 (100,000 cycles)


Each pair of Applause Glass Hinge consists of one damping hinge and one

Closing hinge, only damping hinge is adjustable at closing speed.

To ensure the best performance, Damping Hinge should always

Be installed below the Closing Hinge.

Precaution: Be careful not to loosen off the adjustment screw too far as this will render the hinge inoperable.

Warranties will also be void if screw is loosened too far.