- Glass thickness
- Surface Finish
- Satin/Mirror Polished
- Door Weight
|Product Name||wall to glass fixing non-hold 90 degree L type hydraulic hinge|
|Features||Door is self-closed at any position|
|Material||Stainless Steel 304|
|Surface||Satin Finish/Mirror Finish|
|Suitable Area||Tempered glass|
|Glass Thickness||10-15mm glass panel|
|Tested According to||EN1154(100.000 cycles)|
|Remarks||with damping function|
1.Glassto glass fixing 90˚
2.Suitablefor 10-15mm tempered glass use
3.Maximumdoor leaf weight: 65kg
4.Maximumdoor leaf width: 1000mm
5.Self-closingat any door open angle
6.Doubleaction, maximum door open angle: 95˚
8.Valveadjustment available for closing speed control
9.Self-positionedwhen door reaches to initial position
10.Testedaccording to EN1154 (100,000 cycles)
Each pair of Applause Glass Hingeconsists of one damping hinge and one
Closing hinge, only damping hinge isadjustable at closing speed.
To ensure the best performance, DampingHinge should always
Be installed below the Closing Hinge.
Precaution:Be careful not to loosen off the adjustment screw too far as this will renderthe hinge inoperable.
Warranties will also be void if screw isloosened too far.